How Does Paradise Valley Windshield Replacement Work?
Auto Glass Repairs Explained:
Broken windshields can be a major pain in Paradise Valley. From chips and cracks to complete spiderwebs, damaged auto glass is a serious issue no matter the extent of the problem. That’s because even tiny dings and splits in your windshield can grow into vision-obscuring messes. However, windshield replacement in Paradise Valley isn’t the only solution when you have damaged auto glass. Smaller flaws can actually be repaired invisibly to restore both strength and an unobstructed view to your windshield. Here’s how it works.
The first step to any windshield repair is an evaluation of the damage. The chip or crack should be examined for size and depth as well as location to determine whether it is a candidate for repair. Most flaws up to 6 inches long can be fixed with the typical resin auto glass repair. However in Paradise Valley, keep in mind that this type of solution only works when just the top layer of glass is fractured. Modern windshields are composed of two layers of glass with a rubber membrane laminated in between; the repair can only resolve issues with the first layer of glass, so if both layers are damaged, or you have a hole that goes all the way through, it’s time to start learning about windshield replacement, not repairs. Also, some cracks that are around the perimeter of the windscreen can be difficult or impossible to correct, so make sure that the damage is located in a repairable place.
Once you’ve determined that the window glass can be repaired, the fix itself is relatively easy. Taking approximately 30 minutes, windshield chip repair is both simple and affordable. Using a special, sunlight-cured resin, the auto glass shop technician will inject the epoxy directly into the chip or crack using specialized tools. This completely fills the damage and ensures a smooth finish. The resin dries completely clear, helping the repair blend in to the surrounding windshield and almost totally hiding where the problem was. Natural sunlight dries the windshield crack repair to a waterproof, strong state that reinforces the windscreen and dependably prevents the crack or chip from ever spreading. Windshield replacement offers a reliable solution for both sturdiness and aesthetics.
Windshield repairs are also super convenient, as most auto glass shops can actually come to you. Because the resin cures in sunlight and the special tools used to apply it are quite portable, you won’t have to take your car or truck into the shop to have it fixed. Instead, technicians can be sent to you for mobile glass repair right in your driveway or even your workplace’s parking lot.
The best time to get a cracked windshield repaired is right now. Substantial research data shows that warm temperatures, cold temperatures, temperature shifts, and even rough road surfaces and speed bumps are all likely to exacerbate your car window glass’s damage. Remember, windshield crack repair only works for fissures up to 6 inches long, so if you put off calling the auto glass shop, the crack may grow to the point where windshield replacement is your only option. Save yourself the hassle and the money by bringing in an auto glass repair pro today to take a look. Providing structural support and practically invisible performance, resin car window repairs can help get your windshield back to first-class condition quickly and affordably.
Auto Glass For Classic Cars
Despite what the kids might think, cars were around when their parents were young. Glass had been invented by then and was even around during their grandparent's time. Sometimes it comes as a shock that anything cool existed before video games and cell phones, but classic cars are definitely cool. When windows need to be replaced, lovers of classic vehicles cannot always turn to the regular auto body repair shop where they get their 2011 Ford windows fixed. The right pieces of glass are not typically in stock, and not all windows fit every make and model of car.
Patterns for auto glass were different forty, fifty, and sixty years ago. There are special patterns for each type of vehicle which specialist auto glass replacement and repair shops have access to. Although tools used to cut this glass are more technically advanced compared to those which cut glass 50 and more years ago, the glass is cut precisely to fit into the windshield of an old-fashioned Desoto, Hudson, Studebaker, or other pre-1960 model. A number of auto body shops specializing in repairing old automobiles possess a library of patterns. If the one a customer wants is not available on-site, they will order the pattern. These professionals appreciate the beauty of an older vehicle and the history around its creation.
If you are still uncertain about which company to give your business to, websites often post pictures of cars they have helped to restore. Use these to find out if a company seems to know what it is doing. Although there are specialist auto body outfits all over the country, finding exactly the right professional for the job is worth a road trip if you needed an excuse for one.
Windshield Replacement: What Everyone Needs To Know
Replacing Your Vehicle's Windshield? Here is Your Windshield Replacement Survival Guide.
A vehicles windshield provides the occupants a barrier from road debris and the outside elements. But most people don't know a windshield is designed for structural safety in case of an accident, especially a rollover. A windshield is a vehicles third most important safety feature behind the seat belts, and air bags.
Windshields are like basketball backboards for air bags. So if you have a damaged windshield your air bag may not function correctly. It actually may inflate out the windshield cavity, rather than towards you. Or it won't adsorb any pressure because your windshield simply pushes out.
Most consumers are not aware that when technicians replace your windshield, there is significant scratching to the "pinchweld" where the glass bonds to the car. These scratches must be prepped using paint and rust prevention steps. They should not simply leave exposed scratches where moisture from the exterior side can cause rust to develop.
Here are some questions you should ask your auto glass company:
- Is the new glass OEM?
- Did they remove the brand label on the windshield?
- Does the new glass have a shade band that matches your old glass?
- Is the new windshield the same color glass? (glass is actually colored, not clear)
- Does your windshield have a rain sensor?
- Is your windshield heated? (companies will install non-heated and charge for heated)
- Does the windshield have the right bracket for your rear view mirror?
- Does the new windshield have the same third visor as your old glass? (the painted black design which you can see around the rear view mirror on most cars)
- Are they using a universal trim molding, or the actual trim molding part for your vehicle?
- Does the company pay to fix paint scratches, if made by the auto glass technician?
Always inspect a piece of glass for scratches and distortion before it's installed.
Types of Automotive Glass
A windshield is actually two layers of glass with a laminate material between the layers, what is called "laminated glass". Laminated glass is extremely hard to puncture or break apart. That's why a large object like a stunt man, can impact the windshield without breaking through. The strength of laminated glass combined with proper adhesion of the windshield to the body of the car provides massive strength against the roof collapsing in a rollover.
All of the other windows in your vehicle are "tempered glass", which means they break into tiny fragments to reduce injury to the occupants. (a small fraction of vehicles have laminated side and rear windows also)
Today's vehicles use urethane as the adhesive to bond the windshield to the vehicle, like a glue. Some urethane after complete hardening which can take 2-4 weeks, can hold 500 pounds per square inch of pressure. That's one reason why you could never simply push your windshield out. Impossible! Some urethane allows you to drive away within one hour after installing the windshield, hardening just enough to withstand vehicle accidents. When your replacement has been completed, make sure to inspect the inside of your vehicle around the edge of the glass. Make sure no urethane has oozed out into view or onto your vehicles interior. This is more common then people realize and needs to be fixed immediately before the glue hardens!
You can always find out what you need by calling your local dealer and giving them your VIN Identification number from your vehicle. If your car is important to you and you want to maintain the investment, always call your local dealer and ask for advice about your specific vehicle.
Windshield Shade Bands and Windshield Color
All auto glass has a shaded color. No windshields are completely clear. Typical shading colors are blue, green, bronze, and grey. Be sure sure to get the same color. You will see that all pieces of glass in your vehicle are the same color, excluding privacy glass and tinting.
A windshield may have a shade band across the top near the roof of the vehicle. This area is preferential. You should decide if you like it or not. It does tend to hide the edge of the interiors headliner when looking at the vehicle from the exterior. Shade bands do come in different colors but not all windshields
Most windshields can be ordered without a shade band at all. But you may find the part is actually more expensive because less people order it. Having a shade band does provide some shading in between your sun visors but it does little to drastically shade the sun. Take note the shade band will be darker at night.
Exterior Trim and Moldings
Your vehicle may have exterior trim or moldings cover the edge of the glass and/or covering the edge the car body. If the trim molding is just rubber, make sure you know what the technician is using to replace it. Some companies are now requiring that technicians use only a universal type aftermarket molding, rather than one that is specifically designed for your car. There should also be an OEM molding part available which is exactly the same as your original molding. Do note that cost for OEM is always more.
You may see plastic and/or metal trim moldings covering the edge of your windshield on the exterior. Normally these have some type of plastic or metal clips that attach them to the glass or vehicles body. Make sure the company replaces any broken clips or parts from removal of these parts. If your vehicle is older than 3 years, these parts become very brittle and damage easy. You may be warned about parts that always break, in which the company may request you also purchase that part ahead of time. You may find a lot of companies simply glue those parts back into place, rather than replacing the broken parts.
Vehicle Windshield Logo and VIN Window
On vehicles like a Ford Mustang and Ford F150, you may have a logo in the third visor above the rear view mirror. These windshields can be ordered with out the logo and are cheaper that way. Make sure you ask about your options.
Most windshields have a small narrow window for viewing of the VIN identification number near the lower drivers side portion of the glass. Make sure this window is in the right location on the glass. When the job is completed, make sure that glue has not covered the VIN, the VIN number plate has not been cut off, or that it has not been badly damaged. Police or the DMV will give you a hard time if the number is not legible or is completely missing from that location.